Configuration Transmit Message Interface - 1.0 English

Versal Adaptive SoC Integrated Block for PCI Express LogiCORE IP Product Guide (PG343)

Document ID
Release Date
1.0 English

The Configuration Transmit Message interface is used by the user application to transmit messages to the core. The user application supplies the transmit message type and data information to the core, which responds with the done signal. The following table defines the ports in the Configuration Transmit Message interface of the core.

Table 1. Configuration Transmit Message Interface
Port I/O Width Description
cfg_msg_transmit I 1 Configuration Transmit Encoded Message.

This signal is asserted together with cfg_msg_transmit_type, which supplies the encoded message type and cfg_msg_transmit_data, which supplies optional data associated with the message, until cfg_msg_transmit_done is asserted in response.

Note: When PASID_CAP_ON = TRUE, this port is not available for use.
cfg_msg_transmit_type I 3 Configuration Transmit Encoded Message Type.

Indicates the type of PCI Express message to be transmitted. Encodings supported are:

  • 000b: Latency Tolerance Reporting (LTR)
  • 001b: Optimized Buffer Flush/Fill (OBFF)
  • 010b: Set Slot Power Limit (SSPL)
  • 011b: Power Management (PM PME)
  • 100b -111b: Reserved
Note: When PASID_CAP_ON = TRUE, this port is not available for use.
cfg_msg_transmit_data I 32 Configuration Transmit Encoded Message Data.

Indicates message data associated with particular message type.

000b: LTR -

  • cfg_msg_transmit_data[31] < Snoop Latency Req
  • cfg_msg_transmit_data[30:29] <= Repurposing to pass PASID information. assigned to s_axis_rq_tuser[182:181] inside the IP.
  • cfg_msg_transmit_data[28:26] < Snoop Latency Scale
  • cfg_msg_transmit_data[25:16] < Snoop Latency Value
  • cfg_msg_transmit_data[15] < No-Snoop Latency Requirement
  • cfg_msg_transmit_data[14:13] <= Repurposing to pass PASID information. assigned to s_axis_rq_tuser[180:179] inside the IP.
  • cfg_msg_transmit_data[12:10] < No-Snoop Latency Scale
  • cfg_msg_transmit_data[9:0] < No-Snoop Latency Value

001b: Reserved.

010b: SSPL -

  • cfg_msg_transmit_data[9:0] < {Slot Power Limit Scale, Slot Power Limit Value}

011b: PM_PME -

  • cfg_msg_transmit_data[7:0] <= 8'h00-8'hFF

    PF0-3 - 8'h00-8'h03 Other encodings are reserved

100b - 111b: Reserved

Note: When PASID_CAP_ON = TRUE, this port is not available for use.
cfg_msg_transmit_done O 1 Configuration Transmit Encoded Message Done.

Asserted in response to cfg_mg_transmit assertion, for 1 cycle after the request is complete.