The Inputs tab of the Customize IP dialog box is shown in the following figure. This tab allows the configuration of the input ports, associated clocks, and destination ID pins.
Figure 1. Inputs Tab
- AXI Inputs
- Set the number of AXI4-Stream
inputs to this instance and configure each input. The configuration options of
the Inputs tab are:
- Connected To
-
- PL
- From the programmable logic fabric.
- AIE
- From the AI Engine array.
- TDATA Width (bytes)
- Specify the width of the TDATA signal
- Inter-NoC Inputs
- Set the number of INI input ports to this NoC. You can optionally set the INI Connection Strategy as follows:
- Auto
- Allows IP integrator to determine the correct strategy. This is the default.
- Single Driver
- Has a single driver and possibly multiple loads.
- Single Load
- Has a single load and possibly multiple drivers.