The minimum RDIMM/LRDIMM interface configuration is single rank, single slot RDIMM with 72-bits. The maximum is multi-rank multi-slot RDIMM or any LRDIMM with 72-bits. There are two pinout options for buffered DIMMs: Optimum or Rank Slot and Stack Height Expansion. The minimum and most efficient Optimum pinout option only applies for single rank single slot non-3DS based RDIMMs.
If future applications still only use single rank single slot non-3DS based RDIMMs, you can select the Optimum option. Otherwise for any other application, select the Slot Rank and Stack Height. When you select any multi-rank, multi-slot or 3DS based RDIMM configuration, the only option is Optimum because it already uses the Rank Slot and Stack Height Expansion pinout. When you select any LRDIMM device, the only option is Optimum because it already uses the Rank Slot and Stack Height Expansion pinout. When using any multi-rank multi-slot or 3DS based RDIMM or any LRDIMM device, the existing pinout automatically supports all future RDIMM and LRDIMM topology expansions as well as x4 and x8 device compatibility.
To ensure every future signal routes correctly, you must enable the Write DM or any Write/Read DBI function to generate the DM/DBI ports. These are critical for x4/x8 compatibility. Note any requirements for 3DS devices, quad rank, or dual slot topologies and generate the maximum pinout appropriately to ensure the additional DDR4 output clocks and control signals are generated and included in the hardware design. Enable the Command Address parity feature when generating the pinout if it is required.