Connectivity Tab - 1.1 English - PG313

Versal Adaptive SoC Programmable Network on Chip and Integrated Memory Controller 1.1 LogiCORE IP Product Guide (PG313)

Document ID
PG313
Release Date
2024-11-13
Version
1.1 English

The Connectivity tab of the Customize IP dialog box is shown in the following figure.

Figure 1. Connectivity Tab

The Connectivity tab is used to define the connectivity through the AXIS NoC. Connectivity is captured in the form of a matrix, as shown in the previous figure. The rows of the matrix correspond to the inputs of the axis_noc instance, the columns correspond to the outputs. A check in the box at the intersection of a row and a column indicates a connection from the row input to the column output.

The previous figure shows that: Input S00_AXIS is connected to outputs M00_AXIS, M02_AXIS, and M00_INIS; Input S01_AXISis connected to outputs M00_AXIS and M01_AXIS; Input S02_AXIS is connected to output M02_AXIS; and inter-NoC input S00_INIS is connected to AXIS output M01_AXIS.

Note: Multiple connections from a single INI input are not supported.