The following figure shows the Address Remap tab. This is part of the AXI NoC IP and is visible in the row of tabs in the NoC IP Configuration window.
Figure 1. Address Remap Tab
Click the plus icon to set up a remap. The following window appears.
Figure 2. Add Remap
- Incoming Slave Interface
- From the drop list, select the slave port (NMU) on which the incoming address is present that needs to be remapped.
- Outgoing Master Interface
- From the drop list, select the master port (NSU) on which the outgoing remapped address is output.
- Incoming Address
- The starting address from the slave that requires remapping.
- Outgoing Address
- The outgoing address is the remapped address. It is the first address where remapping starts.
- Range
- The total range of address space that is accessed.
Rules for Remapping
- Incoming Address, Outgoing Address, and Range must all be 64K aligned (multiple of 64K).