Subsystem Configuration Screen - 3.1 English

DisplayPort 1.4 RX Subsystem Product Guide (PG300)

Document ID
PG300
Release Date
2024-05-30
Version
3.1 English

The following figure show the subsystem configuration screen.

Figure 1. Configuration Screen
Component Name
The Component name is used as the top-level wrapper file name for the core. The underlying netlist still retains its original name. Names must begin with a letter and must be composed from the following characters: a through z, 0 through 9, and "_". The name is used as internal module name and should not be used for the component name. The default is v_dp_rxss1_0.
Mode
Selects the desired resolution for the DisplayPort IP. Options are SST or MST.
Video Interface
Selects the AXI4-Stream or native for the input video interface.
MST Streams
Selects the maximum number of streams in MST mode.
Lane Count
Selects the maximum number of lanes.
Bits Per Color
Selects the desired maximum bit per component (BPC).
Link Rate
Selects the maximum link rate possible on the DP link in terms of Gb/s.
Pixels Per Clock (PPC) on input
Selects the maximum pixels per clock on the input interface of the subsystem. The AXI4S and native input data widths and ports are scaled according to the value selected here.
Include AXI IIC
Select to include AXI IIC in DisplayPort subsystem.
Include Clocking Wizard
Link Rate
Selects the desired link rate in Gbps.
Enable Support for YUV420 ColorFormat
Selects the YUV420 colorimetry. When YUV420 color format is selected, by default, SDP is enabled.
Input PPC with YUV420 Support
4 (default), 8. This option is enabled only when YUV420 is enabled and selecting 8 will enable 8K at 60 fps resolution.
Enable HDCP 1.3 Encryption
Enables the HDCP 1.3 encryption.
Enable HDCP 2.3 Encryption
Enables the HDCP 2.2/2.3 encryption.
Enable SDP including Audio
Enables the secondary data packet (SDP) support including audio.
Audio Channels
Selects the number of audio channels.
AUX I/O Buffer location
Selects the buffer location for AUX channel.
AUX I/O Type
Selects the Bidirectional or Unidirectional buffer type.