The following figure show the subsystem configuration screen.
Figure 1. Configuration Screen
- Component Name
- The Component name is used as the top-level wrapper file name for the core. The underlying netlist still retains its original name. Names must begin with a letter and must be composed from the following characters: a through z, 0 through 9, and "_". The name displayport_0 is used as internal module name and should not be used for the component name. The default is v_dp_txss1_0.
- Mode
- Selects the desired resolution for the video stream out. Options are SST or MST.
- Video Interface
- Selects the AXI4-Stream or native for the input video interface.
- MST Streams
- Selects the maximum number of streams in MST mode.
- Lane Count
- Selects the maximum number of lanes.
- Bits Per Color
- Selects the desired maximum bit per component (BPC).
- Link Rate
- Selects the maximum link rate possible on the DP link in terms of Gb/s.
- Pixels Per Clock (PPC) on input
- Selects the maximum pixels per clock on the input interface of the subsystem. The AXI4S and native input data widths and ports are scaled according to the value selected here.
- Include Clocking Wizard
- Link Rate
- Selects the desired link rate in Gbps.
- Enable Support for YUV420 ColorFormat
- Selects the YUV420 colorimetry. When YUV420 color format is selected, by default, SDP is enabled.
- Input PPC with YUV420 Support
- 4 (default), 8. This option is enabled only when YUV420 is enabled and selecting 8 will enable 8K at 60 fps resolution.
- Enable HDCP 1.3 Encryption
- Enables the HDCP 1.3 encryption.
- Enable HDCP 2.3 Encryption
- Enables the HDCP 2.2/2.3 encryption.
- Enable SDP including Audio
- Enables the secondary data packet (SDP) support including audio.
- Audio Channels
- Selects the number of audio channels.
- AUX I/O Buffer location
- Selects the buffer location for AUX channel.
- AUX I/O Type
- Selects the type of AUX channel ports.