The following table defines the bit assignments for the STAT_RX_STATUS_REG1 register. Some bits are sticky, that is, latching their value High or Low once set. This is indicated by the type LH (Latched High) or LL (Latched Low).
| Bits | Default | Type | Signal |
|---|---|---|---|
| 0 | 0 | RO LL | stat_rx_status |
| 4 | 0 | RO LH | stat_rx_hi_ber |
| 5 | 0 | RO LH | stat_rx_remote_fault 1 |
| 6 | 0 | RO LH | stat_rx_local_fault |
| 7 | 0 | RO LH | stat_rx_internal_local_fault 1 |
| 8 | 0 | RO LH | stat_rx_received_local_fault 1 |
| 9 | 0 | RO LH | stat_rx_bad_preamble 1 |
| 10 | 0 | RO LH | stat_rx_bad_sfd 1 |
| 11 | 0 | RO LH | stat_rx_got_signal_os 1 |
|
|||