| SDI_TS_DET_OUT_rx_t_locked |
O |
This output is High when
the transport detection function in the receiver has identified the transport format
of the SDI signal (that is, transport locked) |
| SDI_TS_DET_OUT_rx_t_family[3:0] |
O |
This output indicates
which family of video signals is being used as the transport of the SDI. This output
is only valid when rx_t_locked is High. This port does not necessarily identify the
video format of the picture being transported. It only identifies the transport
characteristics. |
| SDI_TS_DET_OUT_rx_t_rate[3:0] |
O |
This output indicates the
frame rate of the transport. This is not necessarily the same as the frame rate of
the actual picture. This output is only valid when rx_t_locked is High. |
| SDI_TS_DET_OUT_rx_t_scan |
O |
This output indicates
whether the transport is interlaced (Low) or progressive (High). This is not
necessarily the same as the scan mode of the actual picture. This output is only
valid when rx_t_locked is High. |
- See Transport Format Detection for
more detailed signal descriptions.
|