The following figure shows the Core Configuration tab for customizing the SMPTE UHD-SDI RX Subsystem.
Figure 1. Subsystem Configuration Tab
- Component Name
- Base name of the output files generated.
Note: The name must begin with a letter and be composed of the following
characters: a to z, A to Z, 0 to 9 and "_."
Core Parameters
- Video Interface
- Specifies user interface. Available options:
- AXI4-Stream (Default)
- Native Video
- Native SDI
- UHD-SDI Standard
- Specifies the SDI standard. Available options:
- 3G SDI
- 6G SDI
- 12G SDI 8DS (Default): 8 data streams
- 12G SDI 16DS (available only for Native SDI): 16 data streams
- Bits per Pixel Component
- Specifies the bit per component.
- 10
- 12
- Enable YCbCr444/RGB Support
- When enabled, the subsystem supports YCbCr Video Format only.
- Enable High FrameRate (HFR) Support
- Includes HFR logic in the subsystem.
- Enable Dynamic BPP Change
- Available when Bits per Pixel is set to 12. Allows driving 10-bit data into a 12-bit system without reconfiguration; the baremetal driver, provided with the subsystem, automatically manages all internal settings.