Build Software Application Using Unified Vitis IDE - Build Software Application Using Unified Vitis IDE - 2.0 English - PG290

1. Open Unified Vitis IDE.
2. Select Create Platform Component under Embedded Development to create a new platform component.
   
   
3. Set the required component name and location to create the platform component, then click Next.
   
   
4. Select the Hardware Design option and click Browse to navigate the XSA file from the design, then click Next.
   
   
5. Click Next.
   
   
6. Click Finish.
   
   
7. To build/generate the platform, click Build.
   
   
8. Click Board Support Package under standalone.
   
   
9. Click drivers.
   
   
10. In Drivers, find v_smpte_uhdsdi_rx_ss and select Import Examples.
    
    
11. An Import Examples window opens with a list of applications. Refer to the screenshot and select the respective application and click OK.

    Table 1. Applications for Respective Example Designs

    Example Design	Application
    ZCU106 Pass-Through	xuhdsdi_example_a53
    ZCU106 Audio-Video Pass-Through	xuhdsdi_example_a53
    ZCU106 Rx-Only	xuhdsdi_rx_example_a53
    VEK385 Audio-Video Pass-Through	vek385_av_pt
    VCK190 Audio-Video Pass-Through	vck190_av_pt

    
    
    
12. Build the application.
    
    

The Example Application is built and a .elf file is ready to use.