Restart All Tiles - 2.6 English

Zynq UltraScale+ RFSoC RF Data Converter v2.6 Gen 1/2/3/DFE LogiCORE IP Product Guide (PG269)

Document ID
Release Date
2.6 English

To restart all tiles and perform the complete power-on sequence after initialization under software control, perform the following steps:

  1. Write 0x0000_0001 to the Master Reset register to restart all tiles (start and end states revert to their default so there is no need to write 0x0000_000F to the individual tile Restart State register).
  2. Poll the tile Restart Power-On State Machine register for each individual tile to check operation is complete. The power-on sequence is complete when this register reads all zeros.