Total BLLP time is calculated by the core (in bytes) based on timing parameters programmed and non-burst/burst mode selection. This duration refers to BLLP regions defined in VSA, VBP, VACT, and VFP lines of video timing.
The core uses this BLLP duration to schedule command-queue packets, as shown in the following table.
| Bits | Name | Reset Value | Access | Description |
|---|---|---|---|---|
| 31:0 | BLLP Time | 0x0 | R | BLLP duration in bytes (Value is valid only when all the required timing registers are programmed) |