Before working on the rest of instructions in this section, ensure that you have the following hardware available:
- VEK385 (REV-B) board and power supply
- JTAG USB platform cable or USB cable Type A to Type C
- HDMI cable
- HDMI monitor
- OmniVision OS12D40 MIPI-FMC Camera Sensor Module
(LI-MULTI-SENSOR-CPHY-FMC_V1.0)Note: Contact marketing for C-PHY FMC details.
- LI-IMX715-MIPI D-PHY Camera Module with IPEX Connector (https://leopardimaging.com/product/robotics-cameras/cis-2-mipi-modules/i-pex-mipi-camera-modules/rolling-shutter-mipi-cameras/8-4mp-imx715/li-imx715-mipi-m12/)
- Micro Coax I-PEX Cable: 200 mm (Part: FAW-1233-02)
- SD card
- Host PC (to program and communicate with the program through UART)