The Application Example Design demonstrates the use of the MIPI CSI-2 RX subsystem on a VEK385 board. On the capture path, the system receives images captured by an IMX715 image sensor. Processed images display on the HDMI monitor. The MIPI CSI-2 RX subsystem decodes, processes the video data, and converts to AXI4-Stream data with four pixels data per clock. The RAW video data is then converted into RGB data using the Demosaic IP, V_Gamma_Lut, and V_Proc_SS CSC IPs, four pixels at a time and sent to the HDMI Video Out IP.
Note: Ensure that you select the VEK385 (REV-B) board in the
Vivado Design Suiteproject setup. To do this, on the
Default Part screen, click the Boards tab, and select Install/Update Boards. This takes you to the Xhub stores, where you can
right-click the VEK385 (REV-B) board, and select Install. This installs the VEK385 (REV-B) board support files.