The Application Example Design demonstrates the use of the MIPI CSI-2 RX subsystem on a SCU200 board. On the capture path, the system receives images captured by an ALINX AN5020 camera sensor module. Processed images display on the HDMI monitor.
The MIPI CSI-2 RX subsystem decodes, processes video data, and converts to AXI4-Stream data with two pixels data per clock. The RAW video data is then converted into RGB data using the Demosaic IP, V_Gamma_Lut, and V_Proc_SS CSC IPs, four pixels at a time and sent to the HDMI Video Out IP.
Note: Ensure that you select the Spartan UltraScale+
SCU200 board in the project setup in the Vivado Design Suite. To do this,
on the Default Part screen, select the Boards tab, and select Install/Update
Boards. This takes you to the Xhub stores, where you can right-click the
SCU200 board, and select Install. This installs the SCU200 board
support files.