The Application Example Design demonstrates the use of the MIPI CSI-2 RX subsystem on a SCU200 board. On the capture path, the system receives images captured by an Sony IMX219 camera sensor module. Processed images display on the HDMI monitor.
The MIPI CSI-2 RX subsystem decodes, processes video data, and converts to AXI4-Stream data with two pixels data per clock. The RAW video data is then converted into RGB data using the Demosaic IP, V_Gamma_Lut and V_Proc_SS CSC IPs, four pixels at a time and sent to the HDMI Video Out IP.
Note: Ensure that you have selected the SCU200 board in the project
setup in the Vivado Design Suite. To do this, on the Default Part screen,
select the Boards tab, and select Install/Update Boards. This
takes you to the Xhub stores, where you can right-click the SCU200 board, and select
Install. This installs the SCU200 board support files.