- Support for 1-4 D-PHY lane and 1-3 C-PHY lane
- Line rates ranging from 80 to 4500
Mb/sNote: Refer to the specific data sheet for each device to determine the line rate support for that particular device.
- Multiple data type support (RAW, RGB, YUV)
- Filtering based on Virtual Channel Identifier
- Support for zero to 15 Virtual Channel
- Support for one, two, four and eight pixels per clock at the output as defined in AXI4-Stream Video IP and System Design Guide (UG934) format
- AXI4-Lite interface for register access to configure different subsystem options
- Dynamic selection of active lanes within the configured lanes during subsystem generation.
- Interrupt generation to indicate subsystem status information
- Internal D-PHY/C-PHY allows direct connection to image sources
- Versal AI Edge Series Gen 2 and Versal Prime Series Gen 2 devices support for MIPI CSI 2 RX 3.0 standard.
- Support for MIPI CSI-2 standard v2.0/3.0 features such as VCX, RAW16, and RAW20