The following table defines the bit assignments for the STAT_RX_STATUS_REG1 register. Some bits are sticky, that is, latching their value High or Low after it is set. This is indicated by the type LH (Latched High) or LL (Latched Low).
| Bits | Default | Type | Signal |
|---|---|---|---|
| 0 | 0 | RO LL | stat_rx_status |
| 4 | 0 | RO LH | stat_rx_hi_ber |
| 5 | 0 | RO LH | stat_rx_remote_fault 1 |
| 6 | 0 | RO LH | stat_rx_local_fault |
| 7 | 0 | RO LH | stat_rx_internal_local_fault 1 |
| 8 | 0 | RO LH | stat_rx_received_local_fault 1 |
| 9 | 0 | RO LH | stat_rx_bad_preamble 1 |
| 10 | 0 | RO LH | stat_rx_bad_sfd 1 |
| 11 | 0 | RO LH | stat_rx_got_signal_os 1 |
|
|||