-
sys_reset -
an_reset -
ctl_an_* -
ctl_lt_* -
stat_an_start_tx_disable -
stat_an_rxcdrhold -
stat_an_lp_autoneg_able -
stat_an_lp_ability_valid -
stat_an_start_an_good_check -
stat_lt_frame_lock -
stat_lt_signal_detect -
stat_lt_link_training -
stat_lt_link_training_fail -
stat_rx_block_lock -
stat_rx_synced(only available on multi-lane cores) -
stat_rx_aligned(only available on mult-lane cores) -
stat_rx_valid_ctrl_code(only available on 10G/25G core) -
stat_rx_status -
stat_rx_bad_code -
stat_rx_hi_ber
If you are using a line rate that supports Clause 74 Fire code FEC, the signal list is as follows:
-
stat_fec_inc_cant_correct_count -
stat_fec_lock_error -
stat_fec_rx_lock -
stat_fec_inc_correct_count -
ctl_an_fec_10g_request -
ctl_fec_rx_enable -
ctl_fec_tx_enable -
stat_an_fec_enable -
stat_an_lp_fec_10g_ability -
stat_an_lp_fec_10g_request
If you are using a line rate that supports RS-FEC, the signal list is as follows:
-
ctl_tx_rsfec_enable -
ctl_rx_rsfec_enable -
stat_rx_rsfec_am_lock -
stat_an_rs_fec_enable