SST Native Video Interface - 2.1 English - PG199

DisplayPort 1.2 TX Subsystem LogiCORE IP Product Guide (PG199)

Document ID: PG199
Release Date: 2024-12-11
Version: 2.1 English

This interface is enabled when native video is selected (<n> = 1).

Table 1. SST Native Video Interface Ports
Signal Name	I/O	Description
tx_vid_clk_stream1	I	User video clock.
tx_vid_rst_stream1	I	User video reset. Active-High.
tx_video_stream1_tx_vid_vsync	I	Vertical sync pulse. Active on the rising edge.
tx_video_stream1_tx_vid_hsync	I	Horizontal sync pulse. Active on the rising edge
tx_video_stream1_tx_vid_enable	I	User data video enable.
tx_video_stream1_tx_vid_pixel0[47:0]	I	Video data
tx_video_stream1_tx_vid_pixel1[47:0]	I	Video data
tx_video_stream1_tx_vid_pixel2[47:0]	I	Video data
tx_video_stream1_tx_vid_pixel3[47:0]	I	Video data
tx_video_stream1_tx_vid_oddeven	I	Odd/even field select. Indicates an odd (1) or even (0) field polarity. Default is 0. If not used, this pin should be connected to ground.