See for the clock values.
| Signal Name | I/O | Description |
|---|---|---|
| s_axis_aclk_stream<n> | I | MST stream clock. |
| s_axis_aresetn_stream<n> | I | MST stream reset. Active-Low. |
| s_axis_video_stream<n>_tdata[191:0] | I | MST stream video data input. Maximum width is 192. |
| s_axis_video_stream<n>_tlast | I | MST stream video end of line. |
| s_axis_video_stream<n>_tready | O | MST stream input ready. |
| s_axis_video_stream<n>_tuser | I | MST stream video start of frame. |
| s_axis_video_stream<n>_tvalid | I | MST stream video valid. |
| m_aclk_stream1 | I | Video pipe clock for stream1. Used in MST configuration. |
| m_aresetn_stream1 | I | Active-Low video pipe reset for stream 1. Used in MST configuration. |
| m_aclk_stream2 | I | Video pipe clock for stream 2. Used in MST configuration. |
| m_aresetn_stream2 | I | Active-Low video pipe reset for stream 2. Used in MST configuration. |
| tx_vid_clk_stream<n> | I | User data clock for MST stream n. |
| tx_vid_rst_stream<n> | I | Active-High user video reset. |
| tx_video_stream<n>_tx_vid_vsync | I | Vertical sync pulse. Active on the rising edge. |
| tx_video_stream<n>_tx_vid_hsync | I | Horizontal sync pulse. Active on the rising edge |
| tx_video_stream<n>_tx_vid_enable | I | User data video enable. |
| tx_video_stream<n>_tx_vid_pixel0[47:0] | I | Video data |
| tx_video_stream<n>_tx_vid_pixel1[47:0] | I | Video data |
| tx_video_stream<n>_tx_vid_pixel2[47:0] | I | Video data |
| tx_video_stream<n>_tx_vid_pixel3[47:0] | I | Video data |
| tx_video_stream<n>_tx_vid_oddeven | I | Odd/even field select. Indicates an odd (1) or even (0) field polarity. Default is 0. If not used, this pin should be connected to ground. |
|
||