- The following figure shows an example of the launched Vivado
SDK.
- To create a Board Support Package (BSP), click . Enter the BSP Project
name, click Finish, and
then OK. For ZCU102 board, ensure the
target CPU is the Cortex-A53 (
psu_cortexa53_0).
- Find DisplayPort RX/TX Subsystem Driver in the
system.mssfile. If it is not, open the file from the BSP in the Project Explorer . Click Import Examples.
- Select the Example Application corresponding to your hardware:
- For Pass-through KC705 project, select
*_kc705option.Note: In the KC705, for HDCP Pass-through application, select the HDCP option in the Subsystem IP configuration screen before opening the Example Design. - For Pass-through KCU105 project, select
*_kcu105option. - For RX only ZCU102 project, select
*_zcu102_rxonlyoption in RX Subsystem Driver. - For TX only ZCU102 project, select
*_zcu102_txonlyoption in TX Subsystem Driver.
- For Pass-through KC705 project, select
- The following figure shows the example application successfully built and ready
to use.