The following table describes the LED behavior and input switch condition for the validation of the Interlaken core onboard for Duplex/Simplex RX mode configuration.
Note: Green color indicates the successful completion of the
respective test. Red color indicates the current process is busy or respective test
failed.
Validation – Passing Scenario for Duplex/Simplex RX Mode
The following figure describes the LED behavior and input switch condition for the validation of the Interlaken core for passing scenario. Where the packet generator and monitor are active onboard for Duplex/Simplex RX mode configuration.
Figure 1. Board Validation for Duplex/Simplex RX Configuration – Passing
Scenario
Validation – Failing Scenario for Duplex/Simplex RX Mode
Figure 2. Board Validation for Duplex/Simplex RX Configuration – Failing
Scenario
