When CTL_RX_RETRANS_ENABLE = 0, these outputs contain the information in
Bits[31:24] of the most recently received Control word. The value of Control Word
Bit[24] appears on STAT_RX_MUBITS[0]. The value of Control Word Bit[25]
appears on STAT_RX_MUBITS[1], and so forth.
When CTL_RX_RETRANS_ENABLE = 1, these outputs contain the information in
Bits[31:24] of the most recently received Burst Control word, that is, the
Retransmission Sequence Number. This is the sequence number received for a burst that
might or might not be forwarded to the LBUS.(STAT_RX_RETRANS_SEQ
reflects the sequence number of bursts being forwarded to the LBUS. Like above, the
value of Control Word Bit[24] appears on STAT_RX_MUBITS[0]. The value
of Control Word Bit[25] appears on STAT_RX_MUBITS[1], and so forth.
When CTL_RX_CHAN_EXT[1:0] = 2'h1,
STAT_RX_MUBITS[7] is always a value of 1'h0. When
CTL_RX_CHAN_EXT[1:0] = 2'h2,
STAT_RX_MUBITS[7:6] is always a value of 2'h0.
When CTL_RX_CHAN_EXT[1:0] = 2'h3,
STAT_RX_MUBITS[7:5] is always a value of 3'h0.