Streaming Mode with Processor - 3.0 English

AXI Traffic Generator LogiCORE IP Product Guide (PG125)

Document ID
PG125
Release Date
2023-10-18
Version
3.0 English
  1. Program Streaming Config and Transfer Length registers as desired.
  2. Enable the core through register control.
  3. Wait for command completion by polling the done status in the Control register.
    Note: Slave loopback mode does not need any input. The core receives transactions on the slave interface and generates them on the master interface.
Note: When you need to set up the Streaming Config register (0x34), you must also set up the Streaming Error* registers (0x7*) if needed. Then, configure the Streaming Config register to ensure the correct functionality of IP in streaming mode when using a custom Transfer Length.