Static Control - 3.0 English - PG125

AXI Traffic Generator LogiCORE IP Product Guide (PG125)

Document ID: PG125
Release Date: 2023-10-18
Version: 3.0 English

Static Control register allows you to start and stop the AXI Traffic Generator in Static mode.

Table 1. Static Mode Control (0x60)
Bits	Name	Reset Value	Access Type	Description
31:24	Version	0x20	R	Version Value
23:2	Reserved	N/A	N/A	Reserved
1	DONE	0x0	R/W1C	Transfer Done 0 = Indicates core is generating traffic when STEN is 1, else core is in idle mode 1 = Indicates traffic generation completed This bit is set to 1 when the core is disabled by setting STTEN to 0 and the current transfer is completed. This bit resets to 0 either writing 1 to this bit or enabling the core with STEN.
0	STEN	0x0	R/W	Static Enable 0 = Disable traffic generation 1 = Enable traffic generation
W1C – Write 1 to Clear (to clear register bit, you must write 1 to corresponding bits). During traffic generation if the core is forced to stop traffic (either by writing STREN to 0 or using `core_ext_stop` pin) core completes the current transfer gracefully before stopping.