Advanced/Basic Mode with Processor - 3.0 English - PG125

AXI Traffic Generator LogiCORE IP Product Guide (PG125)

Document ID
PG125
Release Date
2023-10-18
Version
3.0 English
  1. Load CMDRAM RAM with the required number of commands.
  2. Load PARAM RAM with the desired opcodes. PARAM RAM is applicable only in Advanced mode.
  3. Load MSTRAM memory with data to be issued during write transactions.
  4. Enable the desired interrupt/status bits.
  5. Enable the core through the register control signal.
  6. Wait for interrupt (if enabled) or poll Enable register control signal to check for completion of issuing the commands.