The control channel exists to supply the bit which determines the rounding type. However, it also provides an opportunity to pass TUSER or TLAST information which has no association with either of the input operands through the core.
- Has TLAST
- Select whether the channel has TLAST. To ease system design, the core
passes any TLAST and TUSER to the output with latency equal to the TDATA field. See
TLAST and TUSER Handling.Note: This option is disabled when the Floating Point mode is selected.
- Has TUSER
- Select whether the channel has TUSER. To ease system design, the core passes any TLAST and TUSER to the output with latency equal to the TDATA field. See TLAST and TUSER Handling.
- TUSER Width
- Select the width, in bits, of the TUSER field for this channel. This parameter is automatically updated in IP integrator.