- AWUSER Width
- Specifies the width of the
awuser signals (if any) to be
monitored by the protocol checker. This value is only available when the
protocol is AXI4 or AXI3. If set to 0,
the signal is omitted.Note: This value is automatically
set when using IP integrator.
- ARUSER Width
- Specifies the width of the
aruser signals (if any) to be
monitored by the protocol checker. This value is only available when the
protocol is AXI4 or AXI3. If set to 0,
the signal is omitted.Note: This value is automatically
set when using IP integrator.
- WUSER Width
- Specifies the width of the
wuser signals (if any) to be
monitored by the protocol checker. This value is only available when the
protocol is AXI4 or AXI3. If set to 0,
the signal is omitted.Note: This value is automatically
set when using IP integrator.
- RUSER Width
- Specifies the width of the
ruser signals (if any) to be
monitored by the protocol checker. This value is only available when the
protocol is AXI4 or AXI3. If set to 0,
the signal is omitted.Note: This value is automatically
set when using IP integrator.
- BUSER Width
- Specifies the width of the
buser signals (if any) to be
monitored by the protocol checker. This value is only available when the
protocol is AXI4 or AXI3. If set to 0,
the signal is omitted.Note: This value is automatically
set when using IP integrator.