Figure 1. Flags
- Enable write data count
- Include write data (s_axis) data count output port.
- Enable almost full
- Include almost full output port. Can only be enabled if Packet Mode is not used.
- Enable programmable full
- Include programmable full output port.
- Programmable full threshold
- Configures the programmable full threshold value. Minimum value: 5+(Number of CDC sync stages if using independent clocks), maximum value: (FIFO depth)-5.
- Enable read data count
- Include read data (
m_axis) data count output port. - Enable almost empty
- Include almost empty output port. Can only be enabled if Packet Mode is not used.
- Enable programmable empty
- Include programmable empty output port.
- Programmable empty threshold
- Configures the programmable empty threshold value. Minimum value: 5, maximum value: (FIFO depth)-5.