The Transmit FIFO ECC Configuration Register shown in the following table is not an actual register, but is instead a write-only address. Bit 0 is for resetting the Transmit FIFO ECC Error counters, other bits are reserved for internal and future use.
ECC Error counters Reset is applied as long as the bit 0 is '1'.
Bit(s) | Name | Core Access | Reset Value | Description |
---|---|---|---|---|
31:1 | N/A | Read | 0 | These bits are reserved for future definition and always return all zeros. |
0 | TFREEC | Read/Write | 0 |
Transmit FIFO Reset ECC Error Counters: Reset ECC error counters for Transmit FIFO. Write 1 to clear the Transmit FIFO ECC Error counters. Counters are cleared as long as this bit is '1'. |
Figure 1. AXI4-Stream Transmit FIFO ECC Configuration Register (Offset 0x44)
