VCS Simulator - 2.9 English

AXI Memory Mapped to PCI Express (PCIe) Gen2 v2.9 LogiCORE IP Product Guide (PG055)

Document ID
Release Date
2.9 English

For a VCS simulation, the following steps are required:

1. In Vivado IDE, change the simulation settings as follows:

° Target simulator: Verilog Compiler Simulator (VCS)

2. On the simulator tab, select Run Simulation > Run behavioral simulation .

IMPORTANT: Simulation is not supported for configurations with the Silicon Revision option set to IES. Only implementation is supported.