• Vendor ID : Identifies the manufacturer of the device or application. Valid identifiers are assigned by the PCI ™ Special Interest Group to guarantee that each identifier is unique. The default value, 10EEh , is the Vendor ID for AMD. Enter your vendor identification number here. FFFFh is reserved.
• Device ID : A unique identifier for the application; the default value, which depends on the configuration selected, is 70 <link speed><link width> h. This field can be any value; change this value for the application.
IMPORTANT: Since this Device ID parameter is evaluated based on the device family (7 in case of 7 series IPs), EP, or RP mode, link width and link speed, it is expected to change whenever any of these parameters changes. For example, if the value of the Device ID is changed first and then any one of the link speed, link width, EP, or RP is changed, then the Device ID value is re-evaluated and replaces the previous value set by you. Hence, AMD recommends changing the link width, link speed, and Device Port type first and then the Device ID value.
• Revision ID : Indicates the revision of the device or application; an extension of the Device ID. The default value is 00h ; enter values appropriate for the application.
• Subsystem Vendor ID : Further qualifies the manufacturer of the device or application. Enter a Subsystem Vendor ID here; the default value is 10EEh . Typically, this value is the same as Vendor ID. Setting the value to 0000h can cause compliance testing issues.
• Subsystem ID : Further qualifies the manufacturer of the device or application. This value is typically the same as the Device ID; the default value depends on the lane width and link speed selected. Setting the value to 0000h can cause compliance testing issues.