Customizing and Generating the Core - 9.0 English

Tri-Mode Ethernet MAC LogiCORE IP Product Guide (PG051)

Document ID
Release Date
9.0 English

This section includes information about using AMD tools to customize and generate the core in the Vivado Design Suite.

The TEMAC solution which comprises the 10/100/1000 Mbps, 1 Gbps, 2.5 Gbps, and 10/100 Mbps cores, generated through the Vivado Design Suite using the Integrated Design Environment (IDE). This chapter describes the Vivado IDE options used to generate and customize the core.

If you are customizing and generating the core in the IP integrator, see the Vivado Design Suite User Guide: Designing IP Subsystems using IP Integrator (UG994) for detailed information.

You can customize the IP for use in your design by specifying values for the various parameters associated with the IP core using the following steps:

  1. Select the IP from the Vivado IP catalog.
  2. Double-click the selected IP or select Customize IP command from the toolbar or right-click menu.

For details, see the Vivado Design Suite User Guide: Designing with IP (UG896) and the Vivado Design Suite User Guide: Getting Started (UG910).

  • Figures in this chapter are illustrations of the Vivado IDE. This layout might vary from the current version.
Figure 1. Vivado Customize IP IDE – Data Rate Tab