Configuration Vector - 9.0 English

Tri-Mode Ethernet MAC LogiCORE IP Product Guide (PG051)

Document ID
Release Date
9.0 English

If the optional management interface is omitted from the core, all of the relevant configuration signals are brought out of the core. These signals are bundled into the rx_configuration_vector and the tx_configuration_vector signals. The bit mapping of these signals is defined in Table 1 and Table 2.

You can permanently set the vector bits to logic 0 or 1 or change the configuration vector signals at any time. However, with the exception of the reset signals, they do not take effect until the current frame has completed transmission or reception.