- AMD Kintex™ 7 devices, -2 speed grade or faster for devices with HR Banks or -1 speed grade or faster for devices with HP banks.
- AMD Virtex™ 7 devices, -2 speed grade or faster for devices with HR Banks or -1 speed grade or faster for devices with HP banks.
- AMD Artix™ 7 devices, -2 speed grade or faster.
- Zynq 7000 devices, -2 speed grade or faster for XC7Z010/20 devices and -1 speed grade or faster for XC7Z030/45/100 devices.
- For UltraScale devices, any I/O supporting a maximum of 1.25 Gb/s should support SGMII over device LVDS. See the performance characteristics of I/O banks in the UltraScale device in the device data sheet.
Recommended: For Chip-to-Chip Copper Implementations, this
interface supports an SGMII link between the FPGA and an external PHY device across a
single PCB; keep the SGMII copper signal lengths to a minimum.