Ports Removed - Ports Removed - 17.0 English - PG047

1G/2.5G Ethernet PCS/PMA or SGMII LogiCORE IP Product Guide (PG047)
Document_ID
PG047
Release_Date
2026-08-11
Version
17.0 English

The ports in the following table were removed under the Transceiver Debug feature of the core.

Table 1. Ports Removed for UltraScale Devices
Signal Direction Description
gt0_drp_addr_in[8:0] Input DRP address bus
gt0_drpi_in[15:0] Input Data bus for writing configuration data to the transceiver.
gt0_drpo_out[15:0] Output Data bus for reading configuration data from the transceiver.
gt0_drprdy_out Output Indicates operation is complete for write operations and data is valid for read operations.
gt0_drpwe_in Input DRP write enable
gt0_drpclk_in Input DRP Clock
gt0_rxchariscomma_out[3:0] Output GT Status
gt0_rxcharisk_out[3:0] Output
gt0_rxbyteisaligned_out Output
gt0_rxbyterealign_out Output
gt0_rxcommadet_out Output
gt0_txdiffctrl_in[3:0] Input GT TX Driver
gt0_txpostcursor_in[4:0] Input
gt0_txprecursor_in[4:0] Input
gt0_txpolarity_in Input GT Polarity
gt0_rxpolarity_in Input
gt0_txprbssel_in[2:0] Input GT PRBS
gt0_txprbsforceerr_in Input
gt0_rxprbscntreset_in Input
gt0_rxprbserr_out Output
gt0_rxprbssel_in[2:0] Input
gt0_loopback_in[2:0] Input GT Loopback
Note: Loopback is not supported by the core when RxGmiiClkSrc=RXOUTCLK.
gt0_txresetdone_out Output GT Status
gt0_rxresetdone_out Output
gt0_rxdisperr_out[3:0] Output
gt0_rxnotintable_out Output
gt0_eyescanreset_in[3:0] Input GT Eye Scan
gt0_eyescandataerror_out Output
gt0_eyescantrigger_in Input
gt0_rxcdrhold_in Input GT CDR
gt0_rxcdrlock_out Output
gt0_rxlpmen_in Input GT GTX/GTH RX Decision Feedback Equalizer (DFE)
gt0_rxdfelpmreset_in Input
gt0_rxdfeagcovrden_in Input
gt0_rxmonitorout_out[6:0] Output
gt0_rxmonitorsel_in[1:0] Input