Customize IP - 11.1 English

Aurora 8B/10B LogiCORE IP Product Guide (PG046)
Document ID
PG046
Release Date
2023-10-19
Version
11.1 English

This Figure shows the Core Options tab of the Customize IP interface with the default options for Zynq™ 7000 and 7 series devices. The left side displays a representative block diagram of the Aurora 8B/10B core as currently configured. The right side consists of user-configurable parameters.

The GT Selections tab is shown in This Figure for Virtex™ 7 and Kintex™ 7 FPGA GTX and GTH transceivers.

Figure 4-1:      Aurora 8B/10B Core Options Tab for Zynq 7000 and 7 Series Devices

X-Ref Target - Figure 4-1

pg046_core_options_tab_zynq_7_series.png
Figure 4-2:      Aurora 8B/10B Core Options Tab for UltraScale Devices

X-Ref Target - Figure 4-2

pg046_core_options_tab_ultrascale.png
Figure 4-3:      Aurora 8B/10B Core Options Tab for UltraScale Devices showing Advanced GT Options

X-Ref Target - Figure 4-3

Core_Options_Tab__UltraScaleAdvancedGT.png

The following four customization options are shown only in the Core Options tab for UltraScale devices. See UltraScale FPGAs Transceivers Wizard (PG182)[Ref 16] for additional details on the Advanced GT options selection.

This Figure and This Figure shows the Core Options tab for UltraScale™ devices.