This section includes information about using Xilinx tools to customize and generate the core in the Vivado Design Suite.
If you are customizing and generating the core in the IP integrator, see the Vivado Design Suite User Guide: Designing IP Subsystems using IP Integrator (UG994) [Ref 7] for detailed information. IP integrator might auto-compute certain configuration values when validating or generating the design. To check whether the values do change, see the description of the parameter in this chapter. To view the parameter value, run the validate_bd_design command in the Tcl console.
You can customize the IP for use in your design by specifying values for the parameters associated with the IP core:
1. Select the IP from the Vivado IP catalog.
2. Double-click the selected IP or select the Customize IP command from the toolbar or right-click menu.
For details, see the Vivado Design Suite User Guide: Designing with IP (UG896) [Ref 8] and the Vivado Design Suite User Guide: Getting Started (UG910) [Ref 10] .
Note: Figures in this chapter are illustrations of the Vivado IDE. This layout might vary from the current version.
All parameters are available and modifiable in the IP integrator. The default configuration of the core in the IP integrator is the same as the that generated though the IP catalog.