Status Read Interface Timing - Status Read Interface Timing - 5.1 English - PG022

AXI DataMover LogiCORE IP Product Guide (PG022)

Document ID
PG022
Release Date
2025-01-09
Version
5.1 English

Reading a status word from the Status FIFO is mechanized by a single AXI4-Stream data beat. An example of reading five status entries from the MM2S Status FIFO is shown in the following figure. In this scenario, the Status FIFO is synchronous to the memory-mapped address and data channel clock. The example illustrates that a status word is considered read from the Status FIFO only when the tvalid and tready handshake signals are both asserted at the rising edge of the synchronizing clock.

Figure 1. Reading Status over the Status Interface