DC Characteristics Over Recommended Operating Conditions

Zynq UltraScale+ RFSoC Data Sheet: DC and AC Switching Characteristics (DS926)

Document ID
DS926
Release Date
2024-05-31
Revision
1.13 English
Table 1. DC Characteristics Over Recommended Operating Conditions
Symbol Description Min Typ 1 Max Units
VDRINT Data retention VCCINT voltage (below which configuration data might be lost) 0.68 V
VDRAUX Data retention VCCAUX voltage (below which configuration data might be lost) 1.5 V
IREF VREF leakage current per pin 15 µA
IL Input or output leakage current per pin (HD I/O and HP I/O 2 ) (sample-tested) 15 µA
Input or output leakage current per pin (PS DDR I/O) (sample-tested) 113 µA
CIN 3 Die input capacitance at the pad (HP I/O) 3.1 pF
Die input capacitance at the pad (HD I/O) 4.75 pF
IRPU Pad pull-up (when selected) at VIN = 0V, VCCO = 3.3V 75 190 µA
Pad pull-up (when selected) at VIN = 0V, VCCO = 2.5V 50 169 µA
Pad pull-up (when selected) at VIN = 0V, VCCO = 1.8V 60 120 µA
Pad pull-up (when selected) at VIN = 0V, VCCO = 1.5V 30 120 µA
Pad pull-up (when selected) at VIN = 0V, VCCO = 1.2V 10 100 µA
IRPD Pad pull-down (when selected) at VIN = 3.3V 60 200 µA
Pad pull-down (when selected) at VIN = 1.8V 29 120 µA
ICCADCONPL Analog supply current for the PL SYSMON circuits in the power-up state 8 mA
ICCADCONPS Analog supply current for the PS SYSMON circuits in the power-up state 10 mA
ICCADCOFFPL Analog supply current for the PL SYSMON circuits in the power-down state 1.5 mA
ICCADCOFFPS Analog supply current for the PS SYSMON circuits in the power-down state 1.8 mA
ICC_PSBATT 4, 5 Battery supply current at VCC_PSBATT = 1.50V, RTC enabled 3650 nA
Battery supply current at VCC_PSBATT = 1.50V, RTC disabled 650 nA
Battery supply current at VCC_PSBATT = 1.20V, RTC enabled 3150 nA
Battery supply current at VCC_PSBATT = 1.20V, RTC disabled 150 nA
IPSFS 6 PS VCC_PSAUX additional supply current during eFUSE programming 115 mA
ADC_REXT ADC external resistor reference –1% 2490 +1% Ω
DAC_REXT DAC external resistor reference –1% 2490 +1% Ω
Internal VREF 50% VCCO VCCO x 0.49 VCCO x 0.50 VCCO x 0.51 V
70% VCCO VCCO x 0.69 VCCO x 0.70 VCCO x 0.71 V
Differential termination Programmable differential termination (TERM_100) for HP I/O banks –35% 100 +35% Ω
n Temperature diode ideality factor 1.026
r Temperature diode series resistance 2 Ω
Calibrated programmable on-die termination (DCI) in HP I/O banks 7 (measured per JEDEC specification)
R 9 Thevenin equivalent resistance of programmable input termination to VCCO/2 where ODT = RTT_40 –10% 8 40 +10% 8 Ω
Thevenin equivalent resistance of programmable input termination to VCCO/2 where ODT = RTT_48 –10% 8 48 +10% 8 Ω
Thevenin equivalent resistance of programmable input termination to VCCO/2 where ODT = RTT_60 –10% 8 60 +10% 8 Ω
Programmable input termination to VCCO where ODT = RTT_40 –10% 8 40 +10% 8 Ω
Programmable input termination to VCCO where ODT = RTT_48 –10% 8 48 +10% 8 Ω
Programmable input termination to VCCO where ODT = RTT_60 –10% 8 60 +10% 8 Ω
Programmable input termination to VCCO where ODT = RTT_120 –10% 8 120 +10% 8 Ω
Programmable input termination to VCCOwhere ODT = RTT_240 –10% 8 240 +10% 8 Ω
Uncalibrated programmable on-die termination in HP I/Os banks (measured per JEDEC specification)
R 9 Thevenin equivalent resistance of programmable input termination to VCCO/2 where ODT = RTT_40 –50% 40 +50% Ω
Thevenin equivalent resistance of programmable input termination to VCCO/2 where ODT = RTT_48 –50% 48 +50% Ω
Thevenin equivalent resistance of programmable input termination to VCCO/2 where ODT = RTT_60 –50% 60 +50% Ω
Programmable input termination to VCCO where ODT = RTT_40 –50% 40 +50% Ω
Programmable input termination to VCCO where ODT = RTT_48 –50% 48 +50% Ω
Programmable input termination to VCCO where ODT = RTT_60 –50% 60 +50% Ω
Programmable input termination to VCCO where ODT = RTT_120 –50% 120 +50% Ω
Programmable input termination to VCCO where ODT = RTT_240 –50% 240 +50% Ω
Uncalibrated programmable on-die termination in HD I/O banks (measured per JEDEC specification)
R 9 Thevenin equivalent resistance of programmable input termination to VCCO/2 where ODT = RTT_48 –50% 48 +50% Ω
  1. Typical values are specified at nominal voltage, 25°C.
  2. For the HP I/O banks with a VCCO of 1.8V and separated VCCO and VCCAUX_IO power supplies, the IL maximum current is 70 µA.
  3. This measurement represents the die capacitance at the pad, not including the package.
  4. Maximum value specified for worst case process at 25°C.
  5. ICC_PSBATT is measured when the battery-backed RAM (BBRAM) is enabled.
  6. Do not program eFUSE during device configuration (e.g., during configuration, during configuration readback, or when readback CRC is active).
  7. VRP resistor tolerance is (240Ω ±1%).
  8. If VRP resides at a different bank (DCI cascade), the range increases to ±15%.
  9. On-die input termination resistance, for more information see the UltraScale Architecture SelectIO Resources User Guide (UG571).
Table 2. PS MIO Pull-up and Pull-down Current
Symbol Description Min Max Units
IRPU 1 Pad pull-up (when selected) at VIN = 0V, VCCO_PSIO = 3.3V 20 80 µA
Pad pull-up (when selected) at VIN = 0V, VCCO_PSIO = 2.5V 20 80 µA
Pad pull-up (when selected) at VIN = 0V, VCCO_PSIO = 1.8V 15 65 µA
IRPD Pad pull-down (when selected) at VIN = 3.3V 20 80 µA
Pad pull-down (when selected) at VIN = 2.5V 20 80 µA
Pad pull-down (when selected) at VIN = 1.8V 15 65 µA
  1. After power-on, the reset values of the MIO pin configuration registers enable and select the PS MIO pull-ups.