The card comes with two maintenance interfaces:
- micro USB
- ADK2 debug connector
Each is described in more detail in subsequent sections. The following table shows the protocols supported for each interface.
| Protocol | micro USB | ADK2 |
|---|---|---|
| FPGA JTAG | YES | YES |
| FPGA UART0 | YES | NO |
| FPGA UART1 | YES | YES |
| MSP debug UART | YES | YES |
| MSP JTAG | NO | YES |
| SMBus | NO | YES |
| PMBus | NO | YES |
Note: Internal logic is shared between the
interfaces. For selecting an interface, refer to ADK2 and USB Port Precedence.