I/O Clock Frequency Control Sequence - I/O Clock Frequency Control Sequence - AM026

The programming sequence is as follows using the CLK_CTRL register.

1. Disable the clock by clearing [IntClkEn, 0] to 0 and [SDClkEn, 2] to 0.
2. Set the clock divisor value using [SDClkFreqDiv_U] and [SDClkFreqDiv_L] and set the [IntClkEn, 0] bit to a 1.
   Note: The internal clock enable register value [IntClkEn, 0] needs to be cleared to 0 for at least one SD_CLK cycle whenever the clock frequency is changed. This can be timed using the CPU clock or timer.
3. Read the [IntClkStable, 1] bit until it reads a 1, which means the internal clock is stabilized.
4. Enable the SD clock by setting [SDClkEn, 2] to 1.