High-speed Clock Control Settings - High-speed Clock Control Settings - AM011

Versal Adaptive SoC Technical Reference Manual (AM011)

Document ID: AM011
Release Date: 2026-03-06
Revision: 1.9 English

The clock control and status bits are listed in the following table.

Table 1. High-speed Clock Control Settings
SD_EMMC Register	Field Name, Bits	Setting	Description
Clock Controls
CLK_CTRL	[SDClkFreqDiv_U, 7:6] [SDClkFreqDiv_L, 15:8]	Note ¹	Clock frequency divider
	[IntClkEn, 0]	1	TX output enable
	[SDClkEn, 2]	0	Clock enable
Clock Status
CLK_CTRL	[IntClkStable, 1]	1	Read-only: 0: Not ready 1: Ready
DLL Clock Controls
	[sel, 5:0]	Note ²	Output tap delay select
	[sel, 7:0]	Note ²	Input tap delay select
Set these bits based on the required frequency of the SDx_REF_CLK and SDx_CLK. See Clock Frequency Divider Register Settings. For frequencies above 25 MHz, the SDx_REF_CLK is set to 200 MHz. These values are used to manually tune the DLL clock phases RX. See DLL Programming Model.