Features - AM002

Versal Adaptive SoC GTY and GTYP Transceivers Architecture Manual (AM002)

Document ID
AM002
Release Date
2023-10-26
Revision
1.3 English

The Versal adaptive SoC GTY/GTYP transceivers provide the greatest performance and integration at 7 nm, including serial I/O bandwidth and logic capacity. As the industry's high-end FPGA at the 7 nm process node, this product family is ideal for applications including 400G networking, large-scale ASIC prototyping, and emulation.

The GTY/GTYP transceivers in the Versal architecture are power-efficient transceivers, supporting line rates from 1.25 Gb/s to 32.75 Gb/s. The GTY/GTYP transceivers are highly configurable and tightly integrated with the programmable logic resources of the Versal architecture. The following table summarizes the features by functional group that support a wide variety of applications.

Table 1. Transceiver Features
Group Feature
PCS 2-byte, 4-byte, and 8-byte internal datapath to support different line rate requirements
8B/10B encoding and decoding
64B/66B and 64B/67B support
128B/130B encoding and decoding for PCI Express® Gen3, Gen4, and Gen5 (GTYP only)
Comma detection and byte and word alignment
TX phase FIFO
RX elastic FIFO for clock correction and channel bonding
Buffer bypass support for fixed latency
PRBS generator and checker
Programmable FPGA logic interface
100 Gb attachment unit interface (CAUI) support
Native multi-lane support for buffer bypass
TX phase interpolator PPM controller for external voltage-controller crystal oscillator (VCXO) replacement
Out-of-band (OOB) signaling including COM signal support for serial ATA (SATA) designs
PMA Two LC tank and two ring oscillator PLLs per Quad for best jitter performance
Power-efficient adaptive linear equalizer mode called the lower-power mode (LPM) with auto adapt
15-tap decision feedback equalization (DFE) with auto adapt
TX pre-emphasis
Programmable TX output
Beacon signaling for PCI Express designs
Line rate support up to 32.75 Gb/s for Versal devices

The GTY/GTYP transceivers support the following use modes:

  • Aurora
  • CCIX 16G/20G/25G
  • Common Packet Radio Interface (CPRI)
  • DisplayPort
  • Fibre Channel
  • HDMI 2.0/2.1
  • Interlaken
  • JESD204b/c
  • OC-3/12/48/192
  • Optical channel transport unit (OTU): OTU-1, OTU-2, OUT-2e, OTU-3, OTU-4
  • PCI Express, revision 1.1, 2.0, 3.0, 4.0, and 5.0 (GTYP only)
  • Serial RapidIO (SRIO)
  • Serial advanced technology attachment (SATA), serial attached SCSI (SAS)
  • Serial digital interface (SDI)
  • SFF-8431 (SFP+)
  • USB 3.0
  • VbyOne
  • 10GBASE-R/KR
  • 10 Gb attachment unit interface (XAUI), reduced pin extended attachment unit interface (RXAUI), 100 Gb attachment unit interface (CAUI), 40 Gb attachment unit interface (XLAUI)