Selecting TARGET - 2024.1 English

To perform a x86 compilation/simulation, run:

make run TARGET=x86sim.

List of all the Makefile targets:

make all TARGET=<aiesim/x86sim/hw_emu/hw> PLATFORM=<FPGA platform>
    Command to generate the design for specified Target and Shell.

make run TARGET=<aiesim/x86sim/hw_emu/hw> PLATFORM=<FPGA platform>
    Command to run application in emulation.

make clean
    Command to remove the generated non-hardware files.

make cleanall
    Command to remove all the generated files.

Note

For embedded platforms, the following setup steps are required:

If the platform and common-image are downloaded from the Download Center (Suggested):

Run the sdk.sh script from the common-image directory to install sysroot using the command: ./sdk.sh -y -d ./ -p

Unzip the rootfs file : gunzip ./rootfs.ext4.gz

export SYSROOT=< path-to-platform-sysroot >

You could also define SYSROOT, K_IMAGE, and ROOTFS by themselves:

export SYSROOT=< path-to-platform-sysroot >
export K_IMAGE=< path-to-Image-files >
export ROOTFS=< path-to-rootfs >