The hardware resource utilizations of reEngine (the one given in L2 test as an example on the Alveo U200) is shown in the following table (performance optimized version at FMax = 200 MHz).
| Item | LUT | REG | BRAM | URAM | DSP |
reEngine (U200) |
499292 | 341196 | 792 | 576 | 36 |
| 54.94% | 17.27% | 70.53% | 60.00% | 0.53% |
The number of PUs on each SLR is listed in the following table:
| SLR | Number of PUs |
| 0 | 5 |
| 1 | 2 |
| 2 | 5 |
Therefore, the kernel throughput should be:
Throughput = 12 * 387 Mb/s = 4.64 Gb/s