Note: This step is not mandatory for platform creation. Please refer to it according to your requirement.
If users need to modify the IP address please go through following steps.
Check the location address space of your IP
Go to address editor by clicking Window-> Address editor to open it.
Next, we will use the example of modifying the interrupt controller IP address to illustrate how to modify the IP address in the address editor.
As the interrupt controller is connected with M_AXI_FPD domain, we need check FPD domain supported address space. Please check the Versal Technical Reference Manual. You could find following address range. That means the IP connected to FPD domain could be placed in 0xA400_0000-0xAFFF_FFFF or 0xB000_0000-0xBFFF_FFFF address space. But conflict is not allowed.
Go to address editor, modify the interrupt controller IP base address according to your requirement. Following is just an example.
Note: The modified base address should be in the LPD address space and the high address should also be in the LPD address space.