IMPORTANT: Before beginning the tutorial ensure you have installed Vitis™ 2025.1 software. Ensure you have downloaded the Common Images for Embedded Vitis Platforms from this link.
Set the environment variable COMMON_IMAGE_VERSAL to the full path where you have downloaded the Common Images. Then set the environment variable PLATFORM_REPO_PATHS to the value $XILINX_VITIS/base_platforms. Additional information on this process may be found here.
The remaining environment variables are configured in the top level Makefile <path-to-design>/02-Prime-Factor-FFT/Makefile file.
RELEASE=2025.1
BOARD=vek280
BASE_NUM=202510_1
# Platform Selection...
VERSAL_VITIS_PLATFORM = xilinx_${BOARD}\_base_${BASE_NUM}
VITIS_PLATFORM_DIR = ${PLATFORM_REPO_PATHS}/${VERSAL_VITIS_PLATFORM}
export VITIS_PLATFORM_XPFM = ${VITIS_PLATFORM_DIR}/${VERSAL_VITIS_PLATFORM}.xpfm
# Set SysRoot, RootFS and Image
export VITIS_SYSROOTS = ${COMMON_IMAGE_VERSAL}/sysroots/cortexa72-cortexa53-amd-linux
export KERNEL_IMAGE = ${COMMON_IMAGE_VERSAL}/Image
export ROOTFS = ${COMMON_IMAGE_VERSAL}/rootfs.ext4
export XLNX_VERSAL = ${COMMON_IMAGE_VERSAL}
export PLATFORM = ${VITIS_PLATFORM_XPFM}
export SYSROOT = ${VITIS_SYSROOT}